Shopping Cart

Adjustable Structural Supports Since 1951.

Shore Cup

  • 4x4 Shore Cup SH-4C - Ellis Manufacturing Co.
  • Shore Cup SH-4CA - Ellis Manufacturing Co.
  • Shore Cup (Wire Head) SH-WH4 - Ellis Manufacturing Co.
  • 2x4 Shore Cup SH-2C - Ellis Manufacturing Co.
$5
per SH-WH4

The Ellis Shore Cups and Wire Heads make attaching Ellis Shores to joists and beams a snap.  Select the appropriate Ellis Shore Cup for your application and quickly attach Ellis shore in place with a couple of nails.  The Ellis Shoring method has save contractors time and money for decades.

Availability: In Stock


Item #

size

Weight

Price

SH-WH4

4x4 Wirehead

1.5 lb

$5

SH-4C

4x4 Cup Type

1.5 lb

$5.91

SH-2C

2x4 Cup Type

1.5 lb

$10

SH-4CA

For Aluminum Purlins

2 lb

$7.22


share:

Product Overview

The Ellis Shoring method has save contractors time and money for decades.  Attach shore holders at desired distance apart along the purlin, with duplex nails, and they are ready to receive adjustable Ellis Shores. After the assembly of 'end shores and purlin' are raised and braced, it’s easy to "slip in" the in-between shores; only a few seconds are required. Instead of three men to erect a shore, just one man is needed.



Specifications


2x4 Shore Holder (SH-2C)


Fits 2x4 Ellis Shore and 2x4 or 2x6 joist.


Type: Cup Type
Material: 3/16" Steel
Size: Will accept 2"x4" lumber through bottom and 2"x6" across the top.
Spacing: Use duplex nails to attache to purlin 2' to 5' apart, depending on slab thickness.

4x4 SHORE CUP (SH-4C)

Fits 4x4 Ellis Shore and 4x4 or 4x6 Purlin.


Type: Cup Type
Material: 3/16" Steel
Size: Will accept 4" lumber through bottom and across the top.
Spacing: Use duplex nails to attache to purlin 2' to 6' apart, depending on slab thickness.

4x4 Shore Cup (SH-4CA) For Aluminum Purlin


Fits 4x4 Ellis Shore and 4" or 5" ALUMINUM Purlin.

Type: Cup Type
Material: 3/16" Steel
Size: Will accept 4" lumber through bottom.
Spacing: Use 1/2" x 1 1/2" hex bolt and nut to attach SH-4CA to Purlin 2’ to 6’ apart, depending on slab thickness.

4x4 WIRE HEAD Shore Holder (SH-WH4)


   

Fits 4x4 Ellis Shore and 4x4 or 4x6 Purlin.

Type: Wire type
Material: 15 / 32” diam. steel
Size: Will accept 4" lumber through bottom and across the top.
Spacing: Use duplex nails to attach to purlin 2’ to 6’ apart, depending on slab thickness.

Detailed Product Drawings

SH-2C
SH-4C


Super Fast Delivery

International Shipping

Technical Support Staff

Returns & Exchanges