Shopping Cart

Adjustable Structural Supports Since 1951.

Heavy Duty Steel Lifting Shore

$402.70
per STL-10HD
136 reviews

The Ellis Heavy Duty Steel Lifting Shore provides temporary or permanent shoring support in heavy load applications in both commercial and residential structures.  Equipped with the Ellis MFG patented Thrust Bearing technology these shores can lift up to 10x more than standard screw jacks. Offered in various heights ranging from 10" to over 14' and with a safe load rating up to 56,000 lbs.  

Availability: In Stock


Item #

range of adjustment

safe load capacity

Weight

Price

STL-10HD

10" to 14"

56,000 lbs

34 lb

$402.70

STL-13HD

13" to 20"

52,000 lbs

37 lb

$443.28

STL-19HD

19" to 32"

48,000 lbs

43 lb

$521.32

STL-31HD

31" to 56"

40,000 lbs

55 lb

$689.89

STL-55HD

55" to 80"

34,000 lbs

72 lb

$755.44

STL-79HD

79" to 104"

30,000 lbs

88 lb

$852.27

STL-103HD

103" to 128"

27,000 lbs

99 lb

$886.56

STL-127HD

127" to 152"

26,000 lbs

116 lb

$952.11

STL-151HD

151" to 176"

25,000 lbs

131 lb

$1,017.67

Product Overview

Ellis Heavy Duty Steel Lifting Shores are for temporary or permanent shoring applications.  Use the Ellis Heavy Duty Shore to support up to 56,000 lbs.  To use measure shoring height, select the appropriate Ellis Heavy Duty Steel Shore, set shore in place, use 1" Steel Adjustment Rods to adjust height (NOT INCLUDED).  Once shore is in place and adjusted to desired height simply tighten set screw (on side of nut) to lock nut to set shore for permanent support solution.  These shores are also know as jack posts.


Demonstration Video



Specifications


Top Plate - 8"x8"x1/2", 4 - Holes 9/16" Dia., spaced 1" OC from edges. Tops are Interchangeable with Custom Sizes upon request. 

Acme Screw - 2.875" Dia., Approx. 4 Acme Threads per inch, Galvanized, Length varies.

Adjustment Nut - Forged and Galvanized for durability, 6" Wide. 4 - 1.063" Dia. Holes as leverage points to make adjustment with 1" Dia. Turning Rod (Item #'s BJTB-12, BJTB-24, BJTB-36, BJTB-60).

Thrust Bearings & Safety Lock - This patented design, found in Light and Heavy Duty Steel Shores, greatly reduces the amount of friction caused when adjustment to the nut is made when the shore is under load and significantly increases its jacking capability. Unlike the standard steel shore, thrust bearing shores are built as one complete unit to aid in uplift resistance and do not come apart. We have also added the Safety Lock set screw in the side of the nut. When tightened down, the adjustment nut locks in place for permanent or long term shoring applications.

3" Sch. 40 Pipe - 3.5" OD, 3.068" ID, Length varies.

Base Plate - 8"x8"x1/2", 4 - Holes 9/16" Dia. spaced 1" OC from edges. (Custom base available upon request)

*Load capacity includes a 2.5 to 1 factor of safety. 

*Do not lift more than 20,000 lbs.

*Steel Shores should be attached to a flat solid foundation and should not be subject to any lateral force. Heavy Duty Steel Shores should be used to support straight vertical loads only. We recommend tightening set screw in the side of the 4 hole nut with 6mm allen wrench prior to loading (unless lifting). Do not extend screw past advertised adjustment range.  Before construction begins it is recommended that you consult with certified engineer for approval of our products within your application.


Shop Drawings and CAD Blocks:



Super Fast Delivery

International Shipping

Technical Support Staff

Returns & Exchanges